SURFACE SHINE is a transparent, high gloss, nonyellowing acrylic polymer engineered as a cure and seal specifically for exterior surfaces such as exposed aggregate, natural stone, brick, quarry tile, terrazzo, and other concrete surfaces. It is also suitable for interior applications. This non-yellowing, durable sealer enhances the appearance of all treated surfaces with a high gloss sheen.
- Beautifies and protects stamped concrete, acid stained concrete, integrally colored concrete, and exposed aggregate
- Minimizes efflorescence
- Protects sealed surfaces from damaging effects of deicing salts and acid rain
- Provides resistance to abrasion and a wide range of chemicals and oils
- Will not yellow under extreme UV exposure
- Acts as a binder to minimize aggregate pop-out
Apply in accordance with recommended coverage rates. Coverage may vary due to porosity and conditions of the concrete.
- Concrete: 200 – 400 sq ft / gal
- Exposed aggregate: 200 – 300 sq ft / gal
- Brick, stucco, etc.: 200 – 300 sq ft / gal
As the porosity of exposed aggregate, brick, and other surfaces varies greatly, test panels should be made to determine the suitability of this product and the number of coats required to achieve the desired results. An application of SURFACE SHINE will renovate existing concrete, brick or terrazzo floors. These surfaces will be brighter and easier to clean and maintain.
Click here for Tech Data sheet
Click here for MSDS sheet