A dissipating resin based emulsion curing compound for use on freshly finished horizontal and vertical concrete surfaces. SPEC REZ is formulated to provide an effective curing membrane that will begin to dissipate after exposure to sunlight, weathering and/or traffic.
Features:
-
Ensures proper curing, resulting in stronger, more wear resistant concrete
-
Helps minimize dusting
-
Once film has dissipated, SPEC REZ is compatible with most paints, sealers, coating and floor covering adhesives
Specifications:
-
Formulated to comply with ASTM C-309, Types 1 and 1D, Class A & B
-
AASHTO M-148, Type 1, Class A & B
-
This product meets V.O.C. contents for Concrete Curing Compounds with a maximum V.O.C. content of 350 g/l.
Application:
Agitate thoroughly before use. Application equipment must be clean and free of foreign materials. A spray application is the preferred method. Application temperatures above 40°F are recommended. Areas that are to be caulked should be masked. Do not pond or puddle. Coverage will vary depending on the texture and porosity of the concrete. Apply at a rate of 200-400 ft2/gal immediately after final trowel (or stripping of forms).
SPEC REZ is formulated as a dissipating type resin. The rate of dissipation is dependent upon climatic conditions, the rate of application and exposure to ultraviolet light. Under normal conditions chemical and physical breakdown will start in 4-6 weeks.
Residual SPEC REZ may be removed with SpecChem Citrus Cleaner or any type of dry abrasive or sanding pad. The use of SPEC REZ does not eliminate the need to properly prepare the surface in accordance with the written instructions for the application of secondary toppings or coatings. Tools and equipment may be cleaned with warm water and soap.
Click here for Tech Data sheet
Click here for MSDS sheet