Catelog Title
Current Catalog
Weekly Special Title
Follow us on Facebook!
 
Product Detail
Top Left Corner  Top Right Corner
   
Bottom Left Corner  Bottom Right corner
Steel Dog 30 Degree Outside Corner Clip
  • These clips slip tightly onto the end of the panel bar, converting a pair of standard filler panels into a corner in seconds.
  • Reduce the number of heavy, expensive, and maintenance-prone full-height corners in your inventory.
  • Angle Corner Clips can be used on panels of any height, with any number of bars.

Calculating Filler Panel Width

To get the ties nearest to the corner to line up, and for uniform wall thickness, the proper width fillers need to be selected. The exact width to match 4” x 4” inside corners in most cases is not a standard filler, but the nearest whole inch size is usually a good approximation. Use the table below to determine the right filler width for your application.

 

Filler Panel Width (W) for Given Wall Thickness and Corner Angle

Corner Clip Angle

Wall Thickness (T) in Inches

6

8

10

12

14

16

22.5°

5-1/4

5-5/8

6

6-3/8

6-3/4

7-1/8

30°

5-5/8

6-1/8

6-5/8

7-1/4

7-3/4

8-1/4

45°

6-1/2

7-3/8

8-1/8

9

9-3/4

10-5/8

 

 The values in the table are rounded to the nearest 1/8" and are based on using a 4" x 4" hinged or fixed-angle inside corner. Use the closest size filler panel to the value listed. For instance, for a 30° corner on an 8" wall, 6" filler panels would be a good choice.

Model : CC30
To purchase this item please contact NuWay at:
1-800-542-1214