Usage: Non-porous surfaces, urethane sealants and coatings. A low-VOC, water-based, quick-drying, one-part primer. TREMprime Non-Porous Primer is not a film-forming primer. It is used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics.
- Apply with a clean cloth. Remove all excess primer from cloth to ensure a very thin layer is applied.
- Dry time is 15 minutes at 70ºF (21°C). Primer must be completely dry before applying sealant or coating.
- Urethane sealants and coatings can be applied up to 8 hours after primer has been applied. After 8 hours, the surface must be cleaned with a Tremco approved solvent and reprimed with TREMprime Non-Porous Primer.
- Coverage Rate: 1400 - 1800 sq.ft./gal.
MSDS Sheet