BIO STRIP WB is a 100% natural organic chemically reactive release agent. Ideal for sensitive environmental situations such as bridge formwork over rivers and streams or potable water reservoirs. BIO STRIP WB provides quick, easy release and leaves an architectural bondable concrete surface.
BENEFITS:
- Organic/Biodegradable
- No petroleum distillates
- Environmentally friendly
- VOC compliant/Odorless
- Ready to use
- Chemically reactive/Non-staining USAGE
- Chemically releases concrete from plywood, steel, aluminum, polystyrene, and fiberglass forms and formliners.
- Prevents concrete build-up on all equipment
- Cleans and reconditions forms
- Helps eliminate build-up and bugholes
- Properly applied, will not inhibit bonding of secondary toppings, coatings or adhesives.
BIO STRIP WB should be applied with a sprayer, brush or roller in a thin uniform film. No special application equipment is necessary, but a spray application is the most practical. Ponding or puddling is to be avoided.
Specific application rates:
- Steel, Plastic, Fiberglass 1,500 sq ft/gal
- Aluminum, HDO Plywood 1,500 sq ft/gal
- Elastometric Form Liners 1,500 sq ft/gal
- MDO Plywood 1,000 sq ft/gal
- Urethane Coated Plywood 1,000 sq ft/gal
- Coated Paper Forms 1,000 sq ft/gal
- Dimensional Lumber 750 sq ft/gal
- Rough Sawn Lumber 750 sq ft/gal
- Striated Plywood 750 sq ft/gal
Standards
- Tested and certified to the performance requirements of NSF/ANSI 61
- Corps of Engineers CEGS-03300, Section 10.8 Form Coating; CE-204, Section 7.10
- Navy Dock and Piers 56359
- V.O.C. Compliant (0 grams/liter)
- 100% Biodegradable
MSDS Sheet
Tech Data Sheet
|