|
|
|
|
Product Detail
|
 |
|
|
|
|
|
Bosch 10-in REAXX Jobsite Table Saw with Wheeled Stand
|
- Watch video here
-
- Active Response Technology™ – mitigates injury to user in case of blade contact, dropping the blade under the table with no blade damage
- Easy system reset – takes less than 60 seconds after blade drop, with no damage to the blade
- Dual-activation cartridge unit – two single-shot cylinders for two separate activations with each cartridge
- Portability – works seamlessly with the included Gravity-Rise™ Wheeled Stand for easy jobsite mobility, with single-action setup and take down
- Smart Guard System – riving knife and anti-kickback pawls provide protection when a kickback occurs, while the overhead guard provides a barrier helping to deter blade contact
- Powerful 15-amp 4.0-hp max motor – delivers 3,650 rpm and the power required for ripping in fine and rough carpentry materials, including standard 10 In. blade and dado applications
- Enhanced SquareLock™ rip fence – engineered for enhanced clamping and trueness with precision improvements for pre-squaring prior to locking
- Large cast aluminum top – provides increased work space and material support with a 25 In. ripping capacity
- Rear outfeed – hardened metal saw extension extends 18 In. and retracts for compact storage
- Onboard System Control – easy-to-understand saw status with intuitive LED lighted display
- Phone app – communicates information from control system to NFC-enabled phone, including number of system activations, servicing needs, access to instructions and other information
- Constant Response™ circuitry – to maintain speed under load and overload protection
- Soft-start circuitry – manages the intensity of motor start-up and minimizes the likelihood of tripping circuit breaker
- Onboard storage – access to all included parts, with additional cartridge storage, manual and system reset instructions
- Arbor lock – allows for easy blade changes with arbor lock and blade wrench located onboard
- Easy blade adjustment – located on top of table near throat plate, direct accessibility for easy blade parallel adjustment
- Convenient toolless throat plate lock – locks throat plate quickly and makes removal and reinstallation easy
- T-slot miter gauge combined with T-slot rail – allows for better control and support during miter gauge applications
- Durable sub base – increases tool life by handling tough jobsite conditions
TECHNICAL DATA
Specifications
Attributes
- Amperage 15.0
- Arbor 5/8"-11
- Bevel Angle Range -2° to 47°
- Blade Diameter 10.0
- Depth of Cut at 45 Deg. 2-1/4"
- Depth of Cut at 90 Deg. 3-1/8"
- Dimensions 15.5 X 32 X 29.75 (including rear out feed in stored position)
- No Load RPM 3,650
- Voltage 110V - 120V
- Weight 133.0lb
- Includes (1) Gravity-Rise™ Wheeled Stand, (1) Rear Outfeed Support, (1) 10 In. 40-Tooth Saw Blade, (1) Dual-Activation Cartridge, (1) Miter Gauge, (1) Rip Fence, (1) Barrier-Guard Device, (1) Anti-Kickback Pawls, (1) Push Stick, (1) Dual-Activation Cartridge Wrench, (1) Blade Wrench, (1) Hex Wrench, (1) Throat Plate Kit
|
|
|
|
Model : GTS1041A-09
|
|
|
|
|
|
|
Related Products
|
|
|
|
|
|