SYSTEM OUTPUTS
• 3-position selector switch (lockable)
• Single phase – 120 / 240V Zig Zag
• Three phase – 120 / 208V Low Wye
• Three phase – 277 / 480V High Wye
• 25 kW / 25 kVA – standby, single phase
• 20 kW / 20 kVA – prime, single phase
• 25 kW / 31 kVA – standby, three phase
• 20 kW / 25 kVA – prime, three phase
ELECTRICAL CONTROLS
• Remote start/stop contacts located in the receptacle box.
• Lockable control box door with diagnostics window
• Lockable lug box with safety switch
• Trips main breaker when door is opened
• Disables voltage regulator
• Output ground connection lug inside lug box
• 125A main breaker with shunt trip
• Convenience receptacles with individual breakers (restricted use in High Wye mode)
• Two 120V 20 amp GFCI duplex outlets – (NEMA 5-20R type)
• Three 240V 50 amp, 3-pole, 4-wire Twist-lock (Non-NEMA 6369)
• Voltage adjustment integrated into Power Zone controller, ± 10%
• One 12V / 720CCA wet cell battery
POWER RATINGS
Standby Prime Single-phase 120/240VAC @ 1.0pf (kW/kVA) 25 kW / 25 kVA Amps: 104 20 kW / 20 kVA Amps: 83
Three-phase 120/208VAC @ 0.8pf (kW/kVA) 25 kW / 31 kVA Amps: 86 20 kW / 25 kVA Amps: 70
Three-phase 120/240VAC @ 0.8pf (kW/kVA) 25 kW / 31 kVA Amps: 75 20 kW / 25 kVA Amps: 60
Three-phase 277/480VAC @ 0.8pf (kW/kVA) 25 kW / 31 kVA Amps: 37 20 kW / 25 kVA Amps: 30
FUEL CONSUMPTION RATES*
Diesel – gal/hr (l/hr) Percent Load Standby Prime
25% 0.6 (2.2) 0.7 (2.6)
50% 1.2 (4.4) 1.1 (4.2)
75% 1.7 (6.5) 1.6 (6.1)
100% 2.3 (8.6) 2.0 (7.4)